Food & Beverages

Food & Beverage industry requires pumps that are efficient and of high hygience standard. They must be gentle with the product handled. The applications range from raw materials, food and beverage products to cleaning fluids, water and waste water handling.
 
 
   
Stainless Steel Centrifugal Pump
We offer a wide range of Stainless Steel Centrifugal Pumps for the domestic and industrial applications. They are available in Single-impeller or Dual-impeller and capacity up to 31 m3/hr and head up to 62m. Power from 0.37 kW up to 3kW with maximum operating pressure of 8 bar and temperature of pumped liquid from -10 °C to 110 °C.

 
 
 
    
Vertical Multi Stage Stainless Steel Pump
The Stainless Steel Vertical Multi Stage Pump from Lowara is a highly reliable and technologically advanced multipurpose pump use in commercial and Industry Water and Treatment, Fire Fighting, Agriculture & Irrigation, Municpality Water and HVAC applications. Many different construction designs are available, with capacity range up to 160m3/hr and head up to 330m and up to 55 kW power. 
 
 
 
 
 
 
  
   
Cast Stainless Steel Centrifugal Pump
Our Cast Stainless Steel Centrifugal Pumps are available in Stainless Steel 304, 316 and Duplex according to standard DIN 24255 and ISO 2858. They are designed to pump hot, cold and moderately aggressive liquids.Typical applications are in Cooling, Chilling and Water treatment. Flow available up to 2100m3/hr and head up to 160m.
 

 
 
 
   
Progressive Cavity Pump
The  Pumps are designed for easy and low maintenance (wear parts can easily be replaced on the site). They are heavy duty pumps for pumping abrasive sludge, viscous products, oils, emulsions etc. Due to the steady non turbulent flow they can also handle shear sensitive products and medium with solids content without breaking up the solids. The capacity range up to 200m3/hr with pressure up to 30Bar.
 

 
 
 
   
High-efficiency Motor
Marelli Motor offers motors in efficiency classes of IE2, IE3 and IE4.
As Electric motor account for about 70% of the electricity consumed by industry, the potential cost saving when using such high efficiency motor is 20% to 30%. Typical applications are in general industries (Series MAQ,BAQ : 0.75 to 315KW). 
 
 
 
          
TEFC Motor
The IEC standard motors are used in general industries. They come with Insulation class F, Temperture rise Class B, Continuous duty S1, IP55. The nomal noise level is less than 80db(A).
(Series MAA,BAA : 0.12 to 2800KW)
 
 
  
          
Ex_d Motor
It is suitable for each classified area,dangerous environments are classified by ZONE,according to risk generated by explosive GAS (zone 0,1and2) or DUST (zone 20,21and22). Typical application are in Oil&Gas industry, Chemical industry,etc.(Series D5,D6 : 0.25 to 560KW).
 
 
 
          
Submersible Pump
We offer the most reliable and efficient system in the market with a unique self-cleaning impeller and the casings are specifically configure to process solid more easily and to reduce clogging. Typical applications are in effluent, sewage and waste water pumping. We offer capacity up to 1620 m3/hr with head up to 55m.
 
 
 
   
          
Self-Priming Pump
Our Self-Primer is a rugged & dependable self-priming, solids handling, trash pump. A solids handling pump that is suitable for a wide range of applications. True solids handling pumps for tough jobs. Typical applications are in Power plant waste, Sewage, Industrial waste, dewatering, mining, automative, poultry industry and sea or river water drainageThe capacity range up to 725m3/hr and head up to 39m with size up to 250mm.
 
 
 
  
          
Chemical Pump
We offer chemical pumps made of thermoplastic polymers. These pumps of thermoplastic polymers material are ideal solution for handling aggressive chemicals found in many industrial applications  where temperature ranges from-40 °C to 120 °C with flow up to 1200 m3/hr and head up to 150m. 
 
 
   
          
Rotary Lobe Pump
Our Rotary Lobe pumps are used in a variety of industries including sugar, pulp and paper, chemical, food & beverages. Their compact construction means space saving and are self priming up to 7-8mt. It is possible to have intermittent dry running without suffering lobes and mechanical seal damage. The capacity range from 520 to 3300ltr/min with maximum pressure  up to 8 Bar.